214778
28
Revision A
3.4
Connecting Hydraulics
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1024218
A
Figure 3.29: Hydraulic Hose Management Arm
1.
Move arm (A) toward left cab-forward side of windrower.
2.
Remove all remaining ties and shipping wire from hose
management arm.
1015479
A
B
Figure 3.30: Platform
3.
Ensure cab door is closed on the left cab-forward side of
the windrower.
4.
Push latch (B), and pull platform (A) toward walking beam
until it stops and latch engages.
1015686
A
C
B
Figure 3.31: Hydraulic Hose Management Arm
5.
Connect hydraulic hose management arm (A) to windrower
by securing the ball joint (B) on arm into the latch
support (C) on windrower leg.
