214143
18
Revision F
1013274
A
Figure 4.2: Down Stop Washer
4.
Check that float lock linkage is on down stops (washer [A]
cannot be moved) at both locations.
NOTE:
If the header is not on down stops during the next two
steps, the voltage may go out of range during operation
causing a malfunction of the AHHC system.
1027026
B
A
Figure 4.3: Float Indicator Box
5.
Locate linkage assembly (A). Verify that dimension (B) is set
to 55 mm (2 3/16 in.). If it is not, adjust linkage (A).