215981
94
Revision A
1036885
A
B
B
Figure 5.31: Forming Shield bracket
–
R85
1036886
A
B
Figure 5.32: Forming Shield bracket
–
R2 Series
2.
If the windrower is configured to work with an R85 or R2
Series Rotary Disc Header:
remove the forming shield
support brackets attached to both windrower lift legs as
follows:
a.
Remove hardware (B).
b.
Remove support bracket (A). Place the bracket and the
hardware in the toolbox.
c.
Repeat on the opposite side.
1016889
A
B
Figure 5.33: Center-Link without Self-Alignment
3.
Windrowers without the self-aligning center-link kit:
Relocate pin (A) in the frame linkage as needed to raise
center-link (B) until the hook is above the attachment pin
on the header.
IMPORTANT:
Ensure that the center-link is positioned high enough that it
does not contact the header as the windrower approaches
the header.
