215981
110
Revision A
1014802
A
Figure 5.72: GSL
20. Start the engine and press HEADER DOWN switch (A) on
the GSL to fully lower the header.
21. Shut down the engine, and remove the key from
the ignition.
1015851
A
B
Figure 5.73: HPT Display
22. If you are not prompted by the HPT display to restore the
header float, restore the header float manually:
a.
Press rotary scroll knob (A) on the Harvest Performance
Tracker (HPT) to highlight the QuickMenu options.
b.
Rotate scroll knob (A) to highlight Header Float
icon (B), and press the scroll knob to select it. The float
setting page appears.
1019607
A
Figure 5.74: HPT Display
23. Press soft key 3 (A) to restore the header float.
NOTE:
If the header float is active, the icon at soft key 3 displays
Remove Float; if the header float has been removed, the
icon displays Resume Float.
24. Shut down the engine, and remove the key from
the ignition.
Connecting R1 Series Rotary Disc Header Electrical and Hydraulics Systems
The header
’
s hydraulic and electrical multicoupler will need to be connected to the windrower.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all hydraulic couplers.
