215981
113
Revision A
1015478
A
B
Figure 5.80: Left Cab-Forward Platform
7.
Push latch (A) to unlock platform (B).
1012700
A
Figure 5.81: Left Cab-Forward Platform
8.
Pull platform (A) toward the cab until it stops and the latch
is engaged.
9.
If necessary, calibrate the knife drive. Calibrate the knife drive whenever you are:
•
Attaching the header to the windrower for the first time
•
Changing the speed sensor or hydraulic drive motor on the header
•
Changing the header drive pump associated with the knife drive, Harvest Performance Tracker (HPT), or the master
controller on the windrower
For instructions on calibrating the knife drive, refer to
Calibrating Knife Drive on Harvest Performance Tracker Display,