215922
373
Revision A
1000549
A
1
2
3
4
5
6
7
8
Figure 5.230: Caster Wheel Tightening Sequence
2.
Tighten wheel nuts (A) to 163 Nm (120 lbf·ft) using the
tightening sequence shown at right. Repeat the tightening
sequence three times.
1019260
A
B
C
D
Figure 5.231: Caster Wheel Assembly
3.
Position wheel assembly (D) in forked caster (C).
4.
Install eight bolts (A) and nuts (four on each side of caster)
to secure axle (B) to caster (C). Torque the nuts to 102 Nm
(77 lbf
∙
ft).
5.
Lower the caster wheel. For instructions, refer to
Removing Forked Caster Wheel
CAUTION
A wheel assembly is heavy. Support the wheel assembly before removing the axle bolts.
1019260
A
B
C
D
Figure 5.232: Caster Wheel Assembly
1.
Raise the caster wheel. For instructions, refer to
2.
Remove eight bolts (A) and nuts (four of each on each side
of caster) attaching axle (B) to forked caster (C), and
remove wheel assembly (D) from caster (C).
