215627
48
Revision A
4.1.8
Checking Air Conditioning Compressor Belts
The windrower
’
s air conditioner compressor is belt-driven. The belt must be tensioned correctly for the air conditioning
system to function properly.
$
Figure 4.17: A/C Compressor Belts
1.
Ensure that air conditioning (A/C) compressor belts (A) are
tensioned so that a force of 45 N (10 lbf) deflects each belt
5 mm (3/16 in.) at midspan.
4.1.9
Starting Engine
Do not start the engine until all other equipment checks have been completed. You can start the engine with the
operator
’
s seat in the cab-forward or the engine-forward position.
DANGER
•
Only start the engine in a well-ventilated space.
•
Ensure that there are no bystanders present when starting the machine.
•
This machine has safety devices which allow the engine to start only when the ground speed lever (GSL) is in PARK,
the steering wheel is locked in the PARK position, and the HEADER ENGAGE switch is in the OFF position. Under NO
circumstances are these devices to be deliberately rewired or adjusted so that the engine can be started when the
GSL is out of the NEUTRAL position.
•
Do NOT start the engine by shorting across the starter or starter relay terminals. If the normal starting circuitry is
bypassed, the machine can start with the drive engaged and potentially start moving.
•
Start the engine only from the operator
’
s seat with the controls in PARK. NEVER start the engine while standing on
the ground. NEVER try to start the engine with someone under or near the machine.
IMPORTANT:
Do
NOT
tow the machine to start the engine. Damage to the hydrostatic drives will result.
