215627
76
Revision A
$
%
Figure 5.3: HPT Display
4.
Press HPT scroll knob (A) to highlight QuickMenu options.
5.
Rotate HPT scroll knob (A) to highlight HEADER FLOAT
symbol (B) and press the scroll knob to select it.
$
Figure 5.4: HPT Display
6.
On FLOAT ADJUST PAGE, press soft key 3 (A) to disable
the float.
$
%
Figure 5.5: GSL
7.
Press HEADER DOWN switch (A) on the ground speed lever
(GSL) to fully retract the header lift cylinders.
8.
If the hydraulic center-link self-alignment kit is installed:
press REEL UP switch (B) on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
Ensure that the center-link is positioned high enough that it
does not contact the header as the windrower approaches
the header.
