MAINTENANCE/SERVICE
Form 169469/169470/169471
150
Revision C
7.8.7 ENGINE COOLING SYSTEM
The engine cooling system is designed to
maintain the engine operating temperature
within the specified operating range.
NOTE
Anti-freeze is essential in any climate. It
broadens the operating temperature range
by lowering the coolant freezing point and
by raising its boiling point. Anti-freeze
also contains rust inhibitors and other
additives to prolong engine life.
IMPORTANT
If anti-freeze strength is not adequate, do
not drain cooling system to protect against
freezing. System may not drain
completely, and damage from freezing
could still result.
To service the cooling system, perform the
following:
DANGER
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
a. Stop engine and remove key.
b. Move the right cab-forward platform to the open
position for access to the coolant tank and
radiator. Ensure the platform latch is engaged in
open position.
c. Raise engine compartment hood to lowest
position. See Section 7.4 ENGINE
COMPARTMENT HOOD.
7.8.7.1 Coolant Level and Concentration
a. Check daily the coolant level in the coolant
recovery tank (A). Tank should be at least half
full.
b. If less, then remove cap (B) and add coolant.
Use Ethylene Glycol with SCA equal parts with
high quality, soft, de-ionized or distilled water as
recommended by the supplier to protect the
engine to temperatures of -30
°
F (-34
°
C).
NOTE
Do not add coolant to radiator except
when changing coolant.
c. Replace cap (B).
B
A
Summary of Contents for M205 2010
Page 1: ...M205 Self Propelled Windrower OPERATOR S MANUAL Revision C Part 169469 25...
Page 51: ...OPERATOR S STATION Form 169469 169470 169471 49 Revision C continued next page...
Page 95: ...HEADER OPERATION D SERIES Form 169469 169470 169471 93 Revision C continued next page...
Page 181: ...MAINTENANCE SERVICE Form 169469 169470 169471 179 Revision C 7 10 13 3 Fuse Box Decal...
