262171
147
Revision A
ϭϬϰϮϮϮϱ
A
B
Figure 4.73: GSL
11. Lower the header fully using HEADER DOWN switch (A).
12. Press HEADER TILT switches (B), as needed, on the GSL to
release the load on center-link.
ϭϬϰϮϮϮϲ
A
Figure 4.74: GSL
13.
Windrowers with self-aligning center-link:
a.
Press REEL UP switch (A) to disengage the center-link
from the header.
b.
Shut down the engine, and remove the key from the
ignition.
1019354
B
A
Figure 4.75: Hydraulic Center-Link
14.
Windrowers without self-aligning center-link:
a.
Shut down the engine, and remove the key from the
ignition.
b.
Disconnect the center-link by lifting release (A) and lift
hook (B) off the header.
