262391
169
Revision A
1016453
A
Figure 4.163: Cutterbar Spindle
8.
Install nut (A).
9.
Retrieve the Safecut spindle-nut wrench from the left
shield plate.
1016425
A
B
C
D
Figure 4.164: Spindle Nut
10. Attach Safecut spindle-nut wrench (B) 90° (D) to torque
wrench (A).
IMPORTANT:
The Safecut spindle-nut wrench
MUST
be used with a
torque wrench.
11. Position Safecut spindle-nut wrench (B) on spindle nut (C).
Torque the nut to 300 Nm (221 lbf·ft).
12. Return Safecut spindle-nut wrench (B) to the left
shield plate.
1011423
A
Figure 4.165: Cutterbar Spindle
13. Inspect the threads of two M10 bolts (A) and replace them
if they are damaged.
14. Install two M10 bolts and washers (A). Torque the
hardware to 55 Nm (40 lbf·ft).
