262391
19
Revision A
Chapter 3:
Operation
Safely operating your machine requires familiarizing yourself with its capabilities.
3.1
Auxiliary Lift Lock Pins
Auxiliary lift linkage lock pins ensure the carrier frame does not move when the header is disconnected from the tractor.
3.1.1
lnstalling Auxiliary Lift Lock Pins
Auxiliary lift linkage lock pins are used to lock the auxiliary lift linkage to prevent the carrier frame from moving when the
header is not attached to a tractor.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat.
DANGER
Before starting the machine, check to be sure all bystanders have cleared the area.
IMPORTANT:
Do
NOT
disconnect the header before installing the auxiliary lift locking pins. When disconnected from a tractor without
the auxiliary lift lock pins installed, the carrier frame may move and contact the machine.
1.
Park the machine on a flat, level surface.
2.
Lower the header fully.
3.
Shut down the engine, and remove the key from the ignition.
