215585
175
Revision A
9.2.2
Converting from Transport to Field Mode
–
with Transport
In field mode, the pull-type is rotated from the narrow road position to full width field position. Steering and lift functions
are operational.
DANGER
To prevent serious injury or death, do NOT convert the machine into, or from transport mode until all people, animals,
and objects are clear of the unit
’
s rotational range.
CAUTION
To prevent injury or equipment damage, ensure cutterbar doors are properly closed before converting the machine
from field to transport mode.
1.
Clear bystanders from the area and start tractor. Do
NOT
operate the rotary disc pull-type.
$
%
&
Figure 9.26: Control Box
2.
Following the steps on transport-to-field decal (A), move
the transport switch to upper position (C) and ensure that
light (B) is
NOT
illuminated.
