49
Motion detection When the user sets the time period for Motion Detection, the motion detection will take
effect. The blue area is the selectable motion detection area. The User can move the dialogue box to choose
the correct area and can also set the sensitivity of the area due to the need. Click
Full screen
or press right
key on the area to display the motion detection area in full screen mode. After setting the area the user can
Save channel
or
Clear
the area. The Alarm output field allows you to activate an output relay. The default
port is 2. If you want to set this channel fully as motion detection recording, you have to turn off the
timing
recording of this channel.
6-21
Note:
If there is an overlap between the motion detection time period and the recording time period as defined under
Schedule (under
Menu/System Setting/Schedule
), continuous recording will take priority
