Mach Power EB-3DP322-017, User Manual

8

2.6

 Manual Calibration

NOTE: BEFORE CALIBRATION, YOU NEED TO DISMANTLE THE MODEL AND PUT NEW TAPES.

2.6.1

 Enter the adjust platform interface

1. Choose “Z” axis 

 , and click reset button 

 to raise the hot bed to the highest degree. 

2.6.2

 Fine Tune the Printing Platform

1. Let the hot bed rise to maximum height and press button 

 to unlock the motors of machine ,and then the printing head can be 

lightly pushed to everywhere by hand. It can also be moved by clicking screen.

2. Observe the printing nozzle, the printing platform printing nozzle has a gap of about 0.1 mm (about the thickness of a sheet of 
A4 paper), then you can insert a sheet of A4 into the printing nozzles and the printing platform gap, to ensure that the paper can be 
inserted, but printing nozzle will not press the paper is suitable. While moving the head, if the clearance is too large or too small, 
you need to adjust the corresponding adjustment nut (As shown in figure).

2.7

 Printing the Test Files

Click on the SD card icon, choose a gcode file which you want to print, and press 

 on the top right corner  to printVerificare che il 

filamento si depositi bene sul piatto, in caso contrario verificare la calibrazione del piatto. Porre attenzione al nastro adesivo, deve