8
2.
Remove the internal tank
3.
Add water and salt to the tank and reposition it inside the machine;
4.
Press the power button;
5.
Adjust the amount of cloud by pressing the corresponding button on the touch
panel;
6.
The operation of the accelerator is the same as above.
Note:
There may be a slight leakage of water from the bottom due to condensa-
tion which is considered normal
Function introduction of remote Control
1.
Before operating the remote control, pull out the insulating tape at the bottom
and plug it back in when not in use.
2.
Operate according to the remote control panel.
Note:
If the position of the buttons on the remote control panel is changed, the
real object shall prevail.
1
Infrared transmitter
2
Insulation tape
Ditital operation
Switch:
Plug in the power and touch this key. The digital screen will light up, indi-
cating that you have entered the working state. It can be shut down if you touch it
