following instructions before use.
4. Remote unlocking: wake up the screen and press 9 + #. There will
be a voice prompt: requesting remote unlocking.
Add a network
1. Press * + # to authenticate administrator identity and then press 1
to access administrator settings. Then there will be a voice prompt of
pressing 3 for network configuration.
2. Voice prompt in network configuration mode: press 1 for hotspot
connection and 2 for intelligent connection.
a. Hotspot connection mode
b. Intelligent connection mode
3. When the network is successfully added, the 1st, 2nd, 3rd and 4th
lights on the keyboard will be on in order with a voice prompt of
“operation completed”.
4. In the event of network addition failure, the 1st, 2nd, 3rd and 4th lights
on the keyboard will not be on and there will be a voice prompt of
“operation failed” upon timeout.
1. Input the wrong password more than 5 times in a row, the keybo-
ard lock for 30 seconds, it does not respond to any operating system
in 30 seconds.
2. Password peeping prevention function: input password as follows
when opening the door with password: XXX password XXX; you can
add some extraneous codes before and after the password, and
then press # to confirm. The password must be included in the input
contents.
3. If there is no operation more than 10 seconds , system will automa-
tically exit.
4. After the voltage is lower than 4.8v, the lock will automatically
alarm every time when it is opened. After the alarm, the lock can
be opened for 200 times. After the number of times exceeds, each
unlock delay is 5 seconds, new batteries must be replaced before the
number of times available.
ENG
9. OTHER NOTES
9
