Settings
58
NANOCOLOR
®
UV
/
VIS
II and
NANOCOLOR
®
VIS
II V 1.1 / 10.2017
6.1.6
Printer
Press the
icon to adjust the printer settings. A printer can be connected directly to the
spectrophotometer via the two USB A ports. In addition to standard printer models
(Please
note: PCL6 protocol must be supported.)
MACHEREY-NAGEL also offers thermal printers
for the connection to the spectrophotometers. The check box "color printing" is only relevant
for printers that support color printing. If the color printing option is deselected, the print-outs
will be in black and white. The "Automatic printing of measurement" checkbox determines
whether a connected printer prints out the measurement results immediately after measuring.
Choosing the entry “Extended printout” the printout of results will contain all information
about a measurement. In case the checkbox is not set, the measurement results on the
printout will only conta
in the most important information. Setting the checkbox “Inverted
printout
”, the printout will start with the latest measured result. When deselectiong this option
the first result will be the oldest in memory. The settings will be saved upon exiting the menu.
Please note: Printouts with a thermal printer are limited to the measurement of tube tests and
rectangular cuvette tests. They cannot print out results of a scan or a color measurement.
Figure 66: Printer settings
6.1.7
Remember sampling location
Press the
icon to open a window to turn on this function. When activated, once a sample
location has been entered, it will be applied to every subsequent measurement until this
option is deselected. A sampling location flag
in the status bar tells you whether or not
this function has been turned on. The setting will be saved upon exiting the menu.
Summary of Contents for NANOCOLOR UV/VIS II
Page 1: ......