IQC
84
NANOCOLOR
®
UV
/
VIS
II and
NANOCOLOR
®
VIS
II V 1.1 / 10.2017
Results can be send to a directly connected printer, or can be exported as PNG-file to an
external storage device and then be printed from another workstation. When measurement
results are printed or exported as PNG-file, the print-out will contain a selection of the most
important information on the sample or all information available on the sample, depending on
the chosen print settings (see Section 6.1.6).
Figure 106: Display of an IQC single result
Details of a measurement can be obtained by selecting a single measured result from the
memory (see Figure 107). It will show not only the result, but also all of the sample
information entered. The information obtained this way can also be printed or exported via
the
icon.
6.6.8
IQC Card 4
Click on the
icon in the IQC menu to open a list box of all the standards for which at least
one standard measurement exists (see Figure 107).
Figure 107: Selecting the standard for the display of the control card
Summary of Contents for NANOCOLOR UV/VIS II
Page 1: ......