Damage of cable
9
NANOCOLOR
®
UV
/
VIS
II and
NANOCOLOR
®
VIS
II V 1.1 / 10.2017
2.6
Damage of cable
Caution
: In case of a damaged cable, switch off the instrument and replace the
cable immediately.
2.7
Transport
For transporting the instrument, the cardboard box used for the initial shipment as well as the
protective inner parts are perfectly appropriate. Therefore, we recommend keeping the box.
In case the original box is not available anymore, a large cardboard box and plenty of soft
packing material, which prevents the instrument from shifting during transport, can be used.
2.8
Lamps
Caution
: The
NANOCOLOR
®
UV
/
VIS
II features a halogen and a deuterium lamp.
The
NANOCOLOR
®
VIS
II features a halogen lamp. Both get very hot during
operation. Hence, there is a risk of severe burns. Before exchanging the lamps, let
them cool down for at least 30 minutes.
Please disconnect the instrument from the power source before starting any
maintenance work in order to avoid electric shock.
Caution
: The deuterium lamp generates ultraviolet radiation, which can harm your
eyes. Never look directly into the light source without suitable UV protection
glasses. Also, protect your skin against direct UV light.
The barcode reader of
NANOCOLOR
®
spectrophotometer is subject to laser
protection class 1M.
2.9
Instrument set-up
2.9.1
Set-up location
Only use the instrument in a suitable location. It should be placed on a dry, clean,
leveled and plain surface. The operating temperature is between 10°C
– 40°C.
Make sure to protect the instrument from drastic changes in temperature. Avoid
positioning the instrument close to windows, hot plates, ovens etc. To ensure correct
functioning and reliable results, the instrument should not be exposed to direct sunlight or
other bright, focused light sources. For optimal performance, humidity should be between
20%
– 80 %
2.9.2
Package content
Please open the shipping box carefully with a sharp tool. Make sure not to damage its
contents. Remove the instrument and all other parts carefully. Check the package,
instrument and accessories for visible damages. In case a part is damaged, please contact
your distributor or MACHEREY-
NAGEL’s technical support
(see chapter 11.4)
.
Summary of Contents for NANOCOLOR UV/VIS II
Page 1: ......