Manager:
Make sure all guards are secured shut when machine is on.
Revised Date:
www
.machineryhouse.com.au
www
.machineryhouse.co.nz
Aug-08
Isolate main power switch before changing blade, cleaning or adjusting.
Plant Safety Program to be read in conjunction with manufactures instructions
F
STRIKING
LOW
Support long heavy jobs and stand clear of of
fcuts.
OTHER HAZARDS, NOISE.
LOW
All electrical enclosures should only be opened with a tool that is not to be kept with the machine.
W
ear hearing protection as required.
W
ear safety glasses
Isolate power to machine prior to changing belts or maintenance.
Stand clear of machine when in operation.
HIGH
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Secure & support Long / heavy material
Eliminate, avoid loose clothing / Long hair etc.
W
ear gloves when changing blades.
Check blade tracking before starting.
Blade guide system should be adjusted to suit material width.
MEDIUM
MEDIUM
PUNCTURING
MEDIUM
Blade guards should always be in the closed position before starting machine.
A
C
ELECTRICAL
D
ENT
ANGLEMENT
CUTTING, ST
ABBING,
H
Assessment
SHEARING
PLANT SAFETY
PROGRAM
No.
Hazard
Identification
Safety of
ficer:
Remove all loose objects around moving parts.
Machine should be installed & checked by a Licensed Electrician.
Developed in Co-operation Between
A.W
.I.S.A
and
Australia Chamber of Manufactures
This program is based upon the
Australian W
orksafe Standard for Plant(NOHSC:1010-1994)
O
NEW
MACHINER
Y
HAZARD IDENTIFICA
TION,
ASSESSMENT & CONTROL
If blade breaks do not open door until both wheels have stopped.
Item
B
Authorised and signed by:
Hazard
Metal Cutting Bandsaw
LOW
CRUSHING
Page 2
Instruction Manual for EB-260A (B061)
04/12/2014
