14 Getting Started with FeverWarn l Models FW1100A and FW1100B
MachineSense • Sales: +1-443-457-1165 • feverwarn@machinesense.com • www.feverwarn.com
Using the FeverWarn App
Device Settings
You can adjust many of the settings on your FeverWarn scanner. Adjusting these
settings is not required as your scanner comes configured from the factory.
These are advanced features of your device. Please read through them thoroughly
before attempting to adjust the device settings.
1. To configure the settings in your FeverWarn scanner, start from
the home screen and tap
Device Settings (Figure 29).
2. Because you are attempting to change the parameters of the scanner,
you will be asked to re-enter your user email and password
(the same that you used to log in to the app). Press
PROCEED (Figure 30).
You are now at the Device Settings master screen
(Figure 31). From here, you can:
1. Manually recalibrate the scanner’s temperature readings.
2. Change the range of acceptable temperatures with Edit Threshold.
3. Set the scanner to alarm based on core body temperature or fist temperature.
4. Change the display settings including units of temperature, the temperature
scanned and the time.
5. Provide custom messages to display after a scan.
6. Adjust the volume of the alarm.
Figure 29
Figure 30
Figure 31
QC-FW005-051821
