These 8 buttons can be set up for user selected features.
CONT will put all jogging into continues mode and will continue to jog as long as you hold the jog button.
X1, X10, and X100 are incremental jogs and will move the incremental distances configured in Config -> Control
These buttons are for jogging the machine. The 4,5,6 buttons can be assigned to any auxiliary axis you have. The jog
rate knob can be used to adjust the speed of the jog while jogging the machine. There is not a percentage or display of
this jog rate on the screen.
MachMotion warranty policy is subject to change. Updated information is available at our website:
https://machmotion.com/warranty
The MachMotion Team
14518 County Road 7240, Newburg, MO 65550
(573) 368-7399 • Fax (573) 341-2672
6. Function Buttons
7. Jog Selection
8. Jog Group
Warranty Information