M2 User's Manual V 1.0 Revised 4/21/2003
Page 13
2.5.
M2.2 Enhanced Configuration and Features:
The M2.2 offers all the configuration and features of the base system with 10 additional start inputs.
Contacts 11 - 20 are located above 1 - 10.
2.5.1. Remote Control, 11 - 20:
12 position pluggable terminal strip. Use for remote control start of
message playback and stopping messages.
Stop
Connect to common to stop message playback
Start 11
Connect to common for message 11 playback
Start 12
Connect to common for message 12 playback
Start 13
Connect to common for message 13 playback
Start 14
Connect to common for message 14 playback
Start 15
Connect to common for message 15 playback
Start 16
Connect to common for message 16 playback
Start 17
Connect to common for message 17 playback
Start 18
Connect to common for message 18 playback
Start 19
Connect to common for message 19 playback
Start 20
Connect to common for message 20 playback
Com
Connecting any input to common activates the function
The Stop and Common inputs are parallel to the corresponding inputs on the 1 - 10 connector.
3. RS-232 Commands:
At the M2> prompt various commands may be issued to control record, playback and other
functions of the M2. Each command and associated string must be followed by control, line feed or
<CR><LF>.
Command List
CMD
Options
Description
BLD
Build message file index
DIR
Directory of Message Priority.
LST
This Commands Listing.
PLY
[<1-255>,<1/2/A>,<1-254>,<1-60>]
Play Message, Channel, Repeat, Delay.
PRI
[<1-255>,<1>Enable/<0>Disable/<S>Scan>]
Set message priority
RST
Warm Reset System
SHP
Init Configs & Erase Messages.
STP
[<1 or 2 or A>]
Stop message playback on selected channel
STS
[<0>Off/<1>On]
Display Play Status Messages.
SYS
Display System Information.
DDIR
Displays a file directory listing
DDEL
[<"filename">]
Deletes file from directory.
DDLD
[<msgnumber>]
Initiates YMODEM session to download file to
the selected message location.
DULD
[<"filename">]
Initiates YMODEM session to upload the
selected file.
DGDT
Get date and time from the M2
DSDT
[<"datetime">]
Set date and time of the M2. Format is
"mmddyyyyhhmmss" for month, day, year,
hours, min., sec.
