M2 User's Manual V 1.0 Revised 4/21/2003
Page 22
7. Memory Card Removal/Installation:
The M2 utilizes removeable PCMCIA FLASH memory cards to store audio and configuration information.
The image below illustrates how the card interfaces with the M2. The memory of the M2 is hot swappable
and may be removed or installed without removing power from the system.
7.1. Removal
1. Unscrew the four mounting screws and remove the cover plate to expose the memory card.
2. Depress eject button located directly to the right of the card to unseat the memory.
3. Remove memory card from the M2.
4. Replace cover and secure with the four mounting screws.
7.2. Installation
1. Unscrew the four mounting screws and remove the cover plate to expose the memory card holder.
2. Align the side rails of the memory card so they glide into the black plastic guides of the memory
card holder.
3. Push the card into the holder until the eject button located directly to the right of the card, extends
beyond the front surface of the card.
5. Replace cover and secure with the four mounting screws.
7.3.
Capacity, Data Rates and Part Numbers:
Size
Model No.
Approx. recording time(Minutes)
Mono / Stereo or Dual Mono
Freq.
7kHz
15kHz
20kHz
Kbps
32
64
128
8Meg
MPC 8 FATA
32/16
16/8
8/4
16Meg
MPC 16 FATA
66/33
33/16
16/8
32Meg
MPC 32 FATA
133/66
66/33
33/16
48Meg
MPC 48 FATA
200/100
100/50
50/25
64Meg
MPC 64 FATA
266/133
133/66
66/33
85Meg
MPC 85 FATA
354/177
177/88
88/44
110Meg
MPC 110 FATA
458/229
229/114
114/57
