background image

 

Shipping Container Contents 

 
The following items should be found in the container of MacFi-se, 
MP3 Digital Audio Record/Play System: 
 

▪  MacFi-se System 
▪  Installation and User Guide 
▪  Set of four rubber feet 

 
Hardware Configurations 
 

▪  MacFi-se; 99 messages, 17 hours + of MP3 playback / recording,  
   RS-232 control, Sync relay, USB Port 

 

Optional Accessories: 

 

▪  Power Pack, 12 VDC, 1.0 amp, 115 V 50/60Hz, Order: MacFi-se-PS 
▪  Rack Mount Kit, Order: MacFi-se RM-KIT 
▪  RS-232 Cable for Enhanced Unit, Order: RS232-CBL 
▪  Weather Resistant Speaker with Mount, Order: CS4 
▪  Microwave Motion Sensor, Order: MS-2 
▪  Input Control Module, 25 start inputs to RS-232, Order: ICM-25-SE 
▪  USB Memory Key (<x>GB), Order MUSB-<x>GB 

 

5.2 What we ask you to do: 

To get warranty service for your MacFi-se system, you must 
provide proof of the date of original purchase. In the event you 
need to ship your MacFi-se system to the factory for service, 
call us for a return authorization number. When you ship your 
MacFi-se system, you must prepay all shipping cost. We 
suggest that you retain your original packing material in the 
event that you need to ship your MacFi-se system. When 
sending your MacFi-se system to the factory, include your 
name, address, phone number, proof of date of purchase, and 
a description of the operating problem. After repairing or 
replacing your MacFi-se system, we will ship it to your return 
address at no cost to you within the USA. Repair or 
replacement of your MacFi-se system at our factory is your 
exclusive remedy. 
 

5.3 What this warranty does not cover: 

This warranty does not cover defects resulting from accidents, 
damage while in transit to factory, alterations, unauthorized 
repairs, failure to follow instructions, misuse, fire, flood and 
acts of God. 
 

 
 
 

 
 
 

25 

 

Summary of Contents for MacFi-se















Reviews: