background image

35

Owner’s Manual

Owner’

s Manual

1604VLZ4 Limited Warranty

Please keep your sales receipt in a safe place.

This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. (“LOUD”) 
and is applicable to products purchased in the United States or Canada through a LOUD-authorized 
reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of 
the product (hereinafter, “Customer,” “you” or “your”).

For products purchased outside the U.S. or Canada, please visit www.720trees.com to find contact 
information for your local distributor, and information on any warranty coverage provided by the 
distributor in your local market.

LOUD warrants to Customer that the product will be free from defects in materials and workmanship 
under normal use during the Warranty Period. If the product fails to conform to the warranty then LOUD 
or its authorized service representative will at its option, either repair or replace any such nonconforming 
product, provided that Customer gives notice of the noncompliance within the Warranty Period to the 
Company at: www.720trees.com or by calling LOUD technical support at 1.800.898.3211 (toll-free in 
the U.S. and Canada) during normal business hours Pacific Time, excluding weekends or LOUD holidays. 
Please retain the original dated sales receipt as evidence of the date of purchase. You will need it to obtain 
any warranty service. 

For full terms and conditions, as well as the specific duration of the Warranty for this product, please visit 
www.720trees.com.

The Product Warranty, together with your invoice or receipt, and the terms and conditions located at 
www.720trees.com constitutes the entire agreement, and supersedes any and all prior agreements 
between LOUD and Customer related to the subject matter hereof. No amendment, modification or 
waiver of any of the provisions of this Product Warranty will be valid unless set forth in a written 
instrument signed by the party to be bound thereby.

Summary of Contents for 1604-VLZ PRO





































Reviews: