Mackie CR1604-VLZ Owner'S Manual Download

Page: 33 / 51

SERVICE INFO

Details concerning Warranty Service are

spelled out on the Warranty Card included
with your mixer (if it’s missing, let us know
and we’ll rush one to you).

If you think your CR1604-VLZ has a problem,

please do everything you can to confirm it before
calling for service. Doing so might save you
from being deprived of your mixer.

Of all Mackie products returned for service

(which is hardly any at all), roughly 50% are
coded “CND” — Could Not Duplicate, which
usually means the problem lies somewhere
other than the mixer. These may sound obvious
to you, but here’s some things you can check:

TROUBLESHOOTING

Bad Channel

• Are the channels assigned to the correct

mix (

1-2

3-4

L-R

• Is the

fader

up?

• Try unplugging any insert devices from the

INSERT

jacks.

• Try the same source signal in another channel,

set up exactly like the suspect channel.

Bad Output

• Is the associated level control (if any) turned up?
• If you’re listening to the

C-R OUTS

PHONES

outputs, has a

SOURCE

selection

been made?

• If it’s one of the

MAIN OUTS

, try unplugging

its companion. For example, if it’s the

LEFT MAIN OUT

, unplug the RCA output.

If the problem goes away, it’s not the mixer.

• If it’s a stereo pair, try switching them

around. For example, if a left output is
presumed dead, switch the left and right
cords, at the mixer end. If the problem
stays on the left, it’s not the mixer.

• Unplug everthing from the

MAIN INSERTS.

Noise

• Turn the channel faders and

AUX RETURN

knobs down, one by one. If the sound disap-
pears, it’s either that channel or whatever is
plugged into it, so unplug whatever that is. If
the noise disappears, it’s from your whatever.

Power

Our favorite question: Is the

POWER

switch on?

Check the fuse

REPAIR

Service for the U.S. version of the CR1604-VLZ

is only available from Mackie Designs, located in
sunny Woodinville, Washington. (Service for mixers
living outside the United States can be obtained
through local dealers or distributors.) If your
mixer needs service, follow these instructions:

Review the preceding troubleshooting
suggestions. Please.

Call Tech Support at 1-800-258-6883, 8am
to 5pm PST, to explain the problem and
request an R.A. number. Have your mixer’s
serial number ready.

You must have a

Return Authorization number, or we
may refuse the delivery.

Set aside the power cord, owner’s manual,
or anything else that you’ll ever want to
see again. We are responsible for the
return of the mixer only.

Pack the mixer in its original package,
including endcaps and box. This is

VERY

IMPORTANT

. If you don’t have a box, please

let Tech Support know that you need a new
one when you call for the R.A. number.

Include a legible note stating your name,
shipping address (no P.O. boxes), daytime
phone number, R.A. number and a detailed
description of the problem, including how
we can duplicate it.

Write the R.A. number in

BIG PRINT

top of the box.

7. Ship the mixer to us. We recommend United

Parcel Service (UPS). We suggest insurance
for all forms of cartage. Ship to this address:

Mackie Designs Inc.

SERVICE DEPARTMENT

16220 Wood-Red Rd. NE

Woodinville, WA 98072

We’ll try to fix the mixer within three
business days. We send everything back
prepaid using UPS BLUE (Second Day
Air). If you rush your mixer to us by Air
Shipment, we’ll treat it in kind by letting it
jump to the head of the line, and we’ll also
ship it back to you UPS RED (Next Day
Air). This paragraph does not necessarily
apply to non-warranty service.