background image

4

HMX-56

HMX

-56

Introduction

Thank you for choosing a Mackie HMX-56 Matrix 

Headphone Mixer/Amplifier. This six-channel 
headphone mixer features left and right TRS main 
inputs, four TRS “source” inputs, as well as an effects 
send and stereo effects return.

The HMX-56 provides six separate headphone mixes, 

each of which can be comprised of the main stereo mix 
and a combination of the four source inputs, which 
could be aux sends or sub groups from your mixer, or 
even individual channel direct outputs.

The effects send can be comprised of a combination 

of the main stereo mix, the four source inputs, and the 
stereo effects return, individually mixed to taste in each 
of the headphone mixes. In addition, each channel has 
its own headphone output level control.

The HMX-56 also makes a great stage monitor 

mixer, allowing each musician to tweak his or her 
individual monitor mix exactly how they want it. Just 
use the phones outputs as inputs to your stage monitor 
amplifiers or in-ear monitor system.

The rugged construction of the HMX-56 makes it a 

roadworthy companion to your arsenal of gear either 
inside or outside of a rack.

HOW TO USE THIS MANUAL

We know that many of you can’t wait to get your 

new headphone amp hooked up, and you’re probably 
not going to read the manual first (sigh!). So the first 
section after this introduction is a Quick-Start Guide 
called “Getting Started” to help you get the HMX-56 set 
up fast so you can start using it right away. Right after 
that are the ever popular hook-up diagrams that show 
typical setups for live sound and recording.

Then, when you have time, read the Features 

Description section. This describes every knob, switch, 
and connection point on the HMX-56.

Throughout this section you’ll find illustrations with 

each feature numbered. If you want to know more 
about a feature, simply locate it on the appropriate 
illustration, notice the number attached to it, and find 
that number in the nearby paragraphs.

This icon marks information that is 
critically important or unique to the 
HMX-56. For your own good, read 
them and remember them. They will 
be on the final test.

This icon leads you to in-depth 
explanations of features and practical 
tips. While not mandatory, they 
usually have some valuable nugget of 
information.

A PLUG FOR THE CONNECTOR SECTION

Appendix B is a section on connectors: balanced 

connectors, unbalanced connectors, and the phones 
connectors used on the HMX-56.

More resources on our website at www.mackie.com.
THE GLOSSARY: A Haven of Non-Techiness for 

the Neophyte

The “Glossary of Terms” is a fairly comprehensive 

dictionary of pro-audio terms. If terms like “clipping,” 
“noise floor,” or “unbalanced” leave you blank, refer to 
this glossary for a quick explanation.

ARCANE MYSTERIES ILLUMINATED

“Arcane Mysteries” discusses some of the down ‘n’ dirty 

practical realities of microphones, fixed installations, 
grounding, and balanced versus unbalanced lines. It’s a 
goldmine for the neophyte, and even the seasoned pro 
might learn a thing or two.

Please write your serial number here for future 

reference (i.e., insurance claims, tech support, 

return authorization, etc.) 

 

 

 

Purchased at: 

 

 

 

Date of purchase:

Summary of Contents for HMX-56

















Reviews: