Onyx P
remium Analog Mix
er with Multi-
Tr
ack USB
Onyx Premium Analog Mixer with Multi-Track USB
34
Bluetooth Blues?
• Restart the device. Completely power
it down, then power it back up.
• Restart the mixer. This is especially useful
after firmware and software updates where
the mixer and device aren’t quite on
the same page. A simple reboot can
sometimes work great wonders.
Need Answers About ASIO?
• There is a lot of great information here,
including ASIO driver downloads, FAQs,
troubleshooting, a forum and more!
Please review before calling Technical
Support:
o
RTC, FX, SD and/or Other Issues
• Please email or call Technical Support
if you are having any other issue not listed
here:
o
o 1-800-898-3211
Repair
For warranty service, refer to the warranty
information on page 49.
Non-warranty service is available at a factory-
authorized service center. To locate the nearest service
center, visit www.mackie.com/support/service-locator.
Service for Onyx Series mixers living outside the United
States can be obtained through local dealers or
distributors.
If you do not have access to our website, you can
call our Tech Support department at 1-800-898-3211,
Monday-Friday during normal business hours, Pacific
Time, to explain the problem. Tech Support will tell
you where the nearest factory-authorized service
center is located in your area.
Microphone Stand
The bottom panel of the Onyx8 has three
non-threaded holes that allow it to be fitted
with an optional microphone stand adapter.
This lets you support the mixer on a standard mic
stand, and adjust its height and level to whatever
suits your strangely-complex set of preferences.
1. Order the Atlas AD-11B mic stand adapter
available from many a fine music store.
(It is made and distributed by Atlas Sound.)
2. Use three Trilobular thread rolling screws
6-32 x 1/4" long to secure the adapter
to the bottom of the mixer [see below].
Do not use screws longer than 1/4" as these
could damage the circuit boards. Do not use
screws shorter than 1/4" or the adapter will
not be securely fixed to the mixer.
