AM
PL
IFI
ER
SP
24
00
2
O F 6 P A G E S
SP2400
Two Channel Controller/Amplifier
2
O F 6 P A G E S
Specifications
Inputs
Program Inputs: 4 Stereo RCA, –10dB to +10dB
Mic 1: Balanced, 100
Ω
, –52 to +4 dB,
variable, switchable phantom power,
XLR and Phoenix-type terminals
Mic 2: Balanced, 100
Ω
, –52 to +4 dB,
variable, switchable phantom
power, Phoenix-type terminals
Amp In: –10dB, Unbalanced, RCA
Outputs
Amplifier Channels: Dual Mono, or
Stereo operation
Output Power, per channel: 200 Watts, 20Hz–20KHz
Auxiliary Output: Unbalanced, RCA stereo
or dual mono
Pre-Out: –10 dB, Unbalanced, RCA
Controls
Program Select: 4 Momentary Pushbuttons
with LED indicators
Volume UP/DN: 2 Momentary Pushbuttons
Music OFF/Mic 2 Select: 1 Momentary Pushbutton
with LED Indicator
Mic 1 EQ: Low/High Potentiometers
(100 to 12kHz ±12dB)
Mic 2 EQ: Low/High Potentiometers
(100 to 12kHz ±12dB)
Program EQ: Low/Mid/Mid Sweep/
High Potentiometers
(80–12kHz ±12dB)
Phantom Power Select: 4 DIP switches (+24 VDC)
Mic Input Pad: –20 dB, on 4 DIP Switches
Page Mic Activation: 2-pole contact on
Phoenix-type connector
VOX Sensitivity: Potentiometer
Indicators
Program Select: 4 Indicator LEDs per Channel, Plus OFF
Volume Setting: 8-segment LED Bar Graph
Status: Power, Overload, Protection
Performance
Frequency Response: 20Hz – 20 kHz, +/–0.5 dB
Total Harmonic Distortion: Less than 0.01% at 200W
Signal to Noise Ratio: Greater than 90dB
Physical
Construction: Black painted aluminum and steel
chassis, White nomenclature
Enclosure: 19" Rack Mountable,
3.5" panel space
Dimensions (HxWxD): 3.5" x 19" x 16.63"
(88.8mm x 482.6mm x 422.3mm)
Net Weight: 34 lbs. (15.42kg)
Accessories
SP-NSM: Ambient Noise Sensing Microphone
SP-SW4: Remote program selection
SP-RVC: Remote volume control
