page 1 of 2
INSTALLATION INSTRUCTIONS
Mackie SP260 Driver and Control Application for PC • April 2017
Driver CH314SER / Control Application V1.0.0
Driver Version CH314SER /
Control Application Version 1.0.0
The Mackie SP260 CH341SER Driver and V1.0.0
Control Application installs are designed to allow your
SP260 Speaker Processor to operate with Microsoft
Windows operating systems. By default, the SP260
works in Standalone mode as well, but the PC Control
Application expands your control to an even greater level
via a large graphic user interface that shows all input or
output processing controls on a single view, plus lets you
backup and manage preset files on your computer’s hard
drive or external storage devices. Now that you have
downloaded the SP260 Driver and Control Application
.zip files to a convenient location (e.g. your desktop), you
should
unzip them and extract
the contents prior to running
the installer.
System Requirements
PC Only:
Windows 7 32 / 64 RTM or greater
(Home, Premium, and Ultimate)
Windows Vista 32 / 64 RTM or greater
(Home, Business, and Ultimate)
Windows XP 32 SP 2 or greater
(Home and Pro)
Supported Devices
SP260:
Use driver
CH341SER
if your serial number ENDS
with CS
IW
001 and higher (e.g. IW, IX, IY, IZ, JA, JB,
etc.).
Use driver
V2.08.24
if your serial number ENDS with
CS
IV
999 and lower (e.g. IV, IU, IT, HA, GO, etc.).
Installation Instructions
1. With the SP260 not yet connected to your
computer, unzip the Driver and Control
Application .zip to a convenient location
(e.g. your desktop)
2. In the extracted/unzipped folder, double-
click CH341SER.exe to install the USB driver
(you may have to do this twice; you will see a
DOS window pop up and disappear when the
installation “takes”)
3. In the extracted/unzipped folder
double-click SetupSP260V10.exe to install
the Control Application
4. Connect the SP260 via USB
5. Power up the SP260 (you should see verification
in the system tray that the device is ready
to use)
6. Launch the SP260 Control Application and
it should automatically discover the
connected device
Using the SP260 Control Application
The SP260 owner's manual contains some basic
descriptions of how the application works once
installed. Please visit http://www.mackie.com/products/
sp260/ to download a copy of the latest manual.
Mackie SP260 Driver and Control Application Installation Instructions
