Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
30
If you choose a U-Net Send signal that originates in the console (e.g. TT FOH Master Aux 1),
the corresponding connection will also be automatically made in the Output Routing screen.
The inverse is also true: if you route a signal to a Card Slot output signal path on the Output
Routing screen, the corresponding signal will automatically be chosen in the appropriate U-
Net Routing screen.
If you choose a U-Net Send signal that does not originate in the console (e.g. DS3232
Input 1), it will automatically be requested at the opposite card’s U-Net Receive input. The
corresponding Output Routing screen selection routing one card to the other will also be
made.
Selection Examples
The following example screens show the selections available for U100 Slot A: Receive. The
same choices are available on Slot A or B, Send or Receive.
DS3232 on a Card Slot RECEIVE
Select 1.
Select DS3232.
Select Input.
Select Instance from 1 to 32.
All are Pre Fader
So, what have we done?
We have set the U100 Slot A channel 1 so it will receive only the DS3232 signal
that corresponds to our selections. The card is ready for the input of a DS3232
signal 1 on Card A receive channel 1. The card inputs can now be routed to
input channels.
Summary of Contents for TT System 32
Page 1: ...F 4A B 0 D0 0334 3D E4AB8 D 30C4...
Page 54: ......
