48
15. When you’re done customizing your studio setup, choose
Save from the File menu.
You can use OMS to create as many different studio setups
as you want, but OMS recognizes only one setup as current
at any given time. If you do not make your new studio setup
current, OMS (and UltraMix) may not recognize the devices
that you defined in it. If a studio setup is current, OMS will
display a diamond to the left of the studio setup name in its
window title.
12. To quit Setup, choose Quit from the File menu.
NOTE: If you have a multi-port MIDI interface, click on
the number to the left of the device you just added, as
shown in the picture below, and type the number of the
port that your Ultra-34 is connected to. Our setup shows
the Ultra-34 on port 1 and the SY-88 on port 2 of the
Studio 4 interface. Both show two-way MIDI communi-
cation with the interface.
