995086
–
Rev B
Page 29 of 32
8 . 12
Trolley Wheels
This section will cover the details of how to remove, refit and replace the trolley wheels, this section covers all
wheel variants. The images below refer to track type 1 wheels but the same procedure will apply to all other
track types.
Removal
1.
Using circlip pliers, remove the circlips from the wheel axel on both wheels.
2.
Remove the wheels and spacers from the circlip side of the trolley.
3.
Remove the axels with the remaining wheels and spacers from the opposite side of the trolley.
Refitting / Replacement
Refitting is a reversal of the removal process noting the following points:
•
When refitting the wheels, see the exploded diagram below for guidance on the assembly order.
•
Inspect the condition of the e-clips, if the clips have been stretched, replace with a new e-clip.
