SA160E User Manual Rev 3 - Aug 2016
Page 5
8 Fit the lifting actuator into the socket
located on the base of the control unit.
7 Fit the hand control unit to the
hand control socket located on the
base of the control unit.
NOTE: The hand control lead can
only be fitted in one orientation
into its socket. Do not use force to
insert the hand control into its
socket. The plug when correctly
inserted should be pushed firmly
home.
9. Fit the mains cable I into the socket
on the underneath of the control unit.
You have a choice where the mains
cable can be stored, either away from
the hoist or it can be stored at the side
of the battery pack / control unit.
See page 11.
