Instruction Manual
Page 8
IMPELLER AND O’RING REPLACEMENT
1) Unscrew adapter
2) Remove o’ring.
3) Remove impeller housing.
4) Remove o’ring.
5) Carefully remove and replace impeller.
6) Replace o’ring.
7) Carefully insert impeller housing.
(Note correct orientation of grooves)
8) Replace o’ring.
9) Firmley hand tighten pump tube.
Note: Impeller must be lubricated with
oil or grease during assembly.
Summary of Contents for BOP20
Page 13: ...Instruction Manual Page 13...
Page 14: ...Instruction Manual Page 14 Notes...
