INST-MAN12 ISSUE 5 © 2020
5
Problem Cause
Remedy
Hose does not fully
retract
Outlet nozzle, gun or tool is too
heavy
Add spring tension (See “Adjust Spring Tension”)
Spring requires re-tensioning
Add spring tension (See “Adjust Spring Tension”)
Replacement hose is too long
Fit correct length hose (Refer to Hose Specifications”)
Hose does not retract at
all
Spring has broke or has lost tension Replace spring canister is required
Incorrect operation
Reel latches on first, second or third ‘click’. After the
third click reel automatically rewinds
Latch assembly is worn
Replace the latch assembly
Fluid leaks from the
swivel
Swivel seals are worn
Replace swivel seals (See “Replacement of Swivel
Seals”)
Reel does not latch
Troubleshooting
