44
WINDOWS ·
DOORS
· SLIDING DOORS
Important
Target
This documentation is intended exclusively for specialist companies and certified specialists.
The work-steps described here in may only be carried out by certified specialists.
Instructions for use
•
Unless otherwise indicated, measurements are made in millimetres.
• Assemble all hardware parts professionally as described in these instructions and observe
all safety instructions.
•
All diagrams are only symbolic.
•
With the spacer-block setting, observe the technical guideline No. 3 of the glazier trade
"Blocking of glazing units".
•
Observe the "Guidelines and Instructions for Product and Liability (GIPL)".
• Inform the end-user about the contents of the "Guidelines and Instructions for End Users
(GIEU)".
•
Printing errors, mistakes and changes are reserved.
Material notes
• The hardware described in this assembly instructions are made from anti-rust material or
galvanically pacified steel and sealed according to EN 12329. They must not be used in
environments with aggressive, corrosive air content.
•
Do not use acid-curing sealants, as these can lead to corrosion of the hardware parts.
•
The door lock elements may only be surface-treated before the hardware is installed.
Any subsequent surface treatment may restrict the functionality of the hardware. In this case,
no warranty claims can be made against the hardware manufacturer.
