D7-3500 User Guide
Chapter 2 - System Setup
HDD Installation
Your unit might come with an installed hard drive. Before opening such an enclosure,
please read the warranty and any other notes from your vendor carefully, as this might
void your warranty.
1. Lift the top cover off the body. If it’s
already locked in place, push it
upwards with a thin and small item
through the opening at the bottom.
2. Remove the screws which are holding
the aluminium frame in place.
3. Lift the frame out of the plastic casing.
4. Align the screw threads of the hard
drive with the holes in the framing and
place it upside down in the frame.
Page 5 / Chapter 2 - System Setup
