Freshman - USB User Guide
The rear part
does not have to
be removed for
drive assembly.
Be careful not to
damage any pins
or components,
and make sure
the drive is
connected firmly.
Chapter 2 - Hard Drive Assembly
Your unit may come with a pre-installed hard drive. Before
opening such an enclosure, please read the warranty from
your vendor carefully, as this could void your warranty.
1. Remove the two screws from the front part.
2. Gently pull out the front part.
3. Install the hard drive by connecting it to the front part.
Page 3 / Chapter 2 - HDD Assembly
