background image

   Hydra LAN                                                                                                     User Guide 

2.2.3  Peer to Peer 

If you connect the Hydra LAN directly to your computer (PC or Mac) via Ethernet cable, 
you can access it using its default IP 192.168.1.1. Open the web browser and enter 
192.168.1.1 to access the web configuration interface. 
 

Note: This only works when the Bonjour service is disabled! 

 
 

2.2.4  Login on a Mac 

When the Bonjour service is disabled, the only way to access the login page is by using its 
IP address. First, you will have to find out the IP address of your Hydra LAN and then use 
the web browser to access the web configuration interface. 
 

1. Turn on your Hydra LAN and make sure it is connected to the same network as your 

computer. 

2. Start the Terminal utility, which is usually located in your Applications folder under 

Utilities. 

 

3. Type “nmblookup hydra-lan”. This is the default name of your Hydra LAN, so if that has 

previously been changed and you don’t know the correct name, reset the device first.  
 
The command looks like this: 
nmblookup hydra-lan 
 

4. After entering the previous command and hitting the Enter key, it should return an IP 

address, followed by the name you just entered. 

 

5. Open your web browser and enter the IP address from the previous step to access the 

web configuration interface. 

6. The default username and password is admin. 

 
 

Note: When the Bonjour service is disabled, you could also use the “Peer to Peer” method 
to login and set up your network drive. 

Page 13  /  Chapter 2 - System Setup 

Summary of Contents for Hydra LAN























































Reviews: