Analog Audio Setup
The simplest configuration is when
the analogue audio system on your
TV set is used. In this case, no matter
what type of AV cable you use (the
default providing Composite/S-Video
signal, one of the optional cables
providing Video Component YPbPr,
or SCART), the analog audio is
provided to the stereo input of your
TV by the Left/Right RCA jacks.
S-VIDEO
TV
or
This configuration uses only one AV
cable connected to the multi-
connector port on MovieStar.
With this simple setup, you can get the highest video quality, but the audio quality remains the
stereo analog quality provided by the TV set speakers.
Digital Audio Setup
This configuration provides the best mix
of video and audio quality.
In this setup, you can connect any of the
available AV cables except the stereo
L/R RCA jacks to the TV set speakers.
Instead, you use the Digital Audio Port of
MovieStar. Connect this port using the
SPDIF copper coaxial or the optional
optical audio cable to the digital input of
your Dolby Digital or DTS Home Theatre
Receiver/Processor. Provided the quality
of this receiver and the correct setup of
the 5.1 Speaker System, you can
experience optimum multimedia quality in both audio and video.
MovieStar
Composite
or
Video Component YPbPr
or
SCART
Analogue
L-R Audio
5.1 Speaker
System
TV
MovieStar
S-VIDEO
or
Composite
or
Video Component YPbPr
or
SCART
Digital Audio Out
(
SPDIF
)
Dolby Digital or
DTS Home Theatre
Receiver/Processor
■
9
Summary of Contents for MovieStar
Page 1: ...MovieStar User Guide Manual Version 1 3...
Page 22: ...19...
