Orion II User Guide
Be careful not to
damage any
components and
double check the
connection between
the bridge board
and your hard drive
before you close up
the case.
Chapter 2 - Installing the HDD
Your unit may come with a pre-installed hard drive. Before
opening such an enclosure, please read the warranty and any
other notes from your vendor carefully, as this could void your
warranty.
USB 2.0 & eSATA
1. Remove the 2 screws on the rear panel of the enclosure.
2. Slide and lift the cover off the body.
3. Carefully install the hard drive and connect it.
Page 3 / Chapter 2 - Installing the HDD