background image

2

1. Safety Precautions Safety precautions.

In order to avoid harm and property damage to users and other personnel, please carefully read
the following important safety matters, please strictly abide by, and on the basis of full
understanding of the content of the correct use. Before use, please read this manual carefully
and use in strict accordance with the instructions. In case of any personal injury or property loss
caused by improper use of this product, the Company shall not assume any legal liability.

Interpretation of signs

Forbidden Sign

Do not operate

Warning Sign

Should strictly follow the

requirements

Attention Sign

The part that must be paid

attention to

Forbidden

Do not disassemble, install, or maintain the range hood for non-professional personnel.

Non-professional maintenance personnel are absolutely prohibited to change the internal
wiring of range hood without permission.

Do not touch the power plug, electrical parts and power switch with wet hands. Otherwise,
electric shock may occur.

The fire should be put out in time when not in use. It is forbidden to bake the range hood
directly by the fire, and make it hot and dangerous.

Do not allow unsupervised children and the weak to use the range hood alone, otherwise it
may lead to electric shock or other accidental injury.

Do not modify, stretch, tie, or press the power cable. Otherwise, the power cable may be
damaged and electric shock or fire may occur.

Do not allow electrical parts such as motors, switches and connectors to get wet with water.
Do not flush the range hood with water. Do not use the range hood when it is wet with
water. If used, it will lead to electric leakage, electric shock and other accidents.

Warning

Summary of Contents for CXW-300-T2C















Reviews: