3
Before cleaning range hoods and providing installation or maintenance services, disconnect
the power supply to avoid electric shock.
The exhaust gas from the range hood should not be discharged into the hot pipe used to
discharge the smoke from burning gas or other fuels.
When a range hood is used in conjunction with an appliance that burns gas or other fuel,
the room must be well ventilated.
If not cleaned according to the instruction manual, the range hood has the risk of fire.
To avoid injury, do not put your fingers or other objects into the moving parts of the range
hood.
When the oil pan is on fire, please turn off the range hood immediately and use effective
extinguishing methods to extinguish the fire, such as covering the open flame with a metal
lid, closing the main gas valve immediately, and keeping combustible materials away from
the open flame.
Attention
The range hood should use a special power socket, and the special power socket should be
reliably grounded.
The ambient temperature of the range hood cannot exceed 40
°
C.
Exterior parts (such as decorative sealing plates) are covered with protective films. Remove
them carefully before use.
If the power cable is damaged, it must be replaced by professionals from the manufacturer,
maintenance department or similar departments to avoid danger.
This appliance is an outdoor range hood, and the lampblack is discharged to the outside
through the smoke pipe. Please ensure that the exhaust pipe is smooth, so as not to affect
the smoke exhaust effect.
The installation shall be carried out by professional personnel. After the installation and test
run, the after-sales service personnel shall explain the use method to the user while there is
no abnormal phenomenon.
If you need to clean the inside of the range hood, please contact Macro after-sales
personnel for professional cleaning.
If need to use the AC power of more than 220V, please confirm with supplier for safety
issue.