11
Turn the player on
1. Turn the ignition to either ACC or ON.
2. Press the power button on the player or the remote control. If no disc is in
the drive, it displays
“
NO DISC
”
.
3. To change input source, press SRC and alternate among A/V input source:
DVD-IN, AV IN1(first additional audio-video source) and AV IN2 (second
audio-video source). Additional AV source must be connected.
Note:
You cannot insert a DVD into the slot if you have selected
an alternate audio-video source (AV IN1 or AV IN2).
Turn the player off
To turn the power off, press the power button.
If a disc is playing when you turn the power off and back on again, the player
continues playback from where you stopped.
Note:
Once the player is turned off, you cannot eject a disc in the player.
Chang the image aspect ration
A common display setting to change is screen mode, which controls the
aspect ratio used to display images.
Adjust the display
1. Press the
button on the panel or press and hold the
MENU
button on
the remote control to display adjust menu (OSD).
2. In the OSD MENU , press the
MENU
button again to sequentially select
each menu item .
Contrast
Adjusts the differences between the light and dark areas of
the image
Brightness
Makes the whole image lighter or darker
Color
Adjusts color based on the color spectrum
Tint
Adjusts the intensity of the color when in NTSC mode (to play
