background image

Using The Computer

2 - 4 Turning on the Computer

2

Turning on the Computer

Now you are ready to begin using your computer. To turn it on simply press
the power button on the front panel.

When the computer is on, you can use the power button as a Standby/Hiber-
nate/Shutdown hot-key button when it is pressed for less than 

4 seconds

(pressing and holding the power button for longer than this will shut the com-
puter down). Use 

Power Options

 in the 

Windows

 control panel to configure

this feature.

If the computer is in 

Tablet Mode

 you can use the “Q” Hot-Key as a power

button (see 

“Q Key Functions” on page 2 - 16

 for full details).

Shutdown

Note that you should
always shut your com-
puter down by choos-
ing the 

Shut Down/

Turn Off Computer

command from the

Start

 menu in 

Win-

dows

.

 This will help

prevent hard disk or
system problems.

Forced Off

If the system “hangs”, and the 

Ctrl

 + 

Alt

 + 

Del

 key combination doesn’t work, press

the power button for

 4 seconds, 

or longer

to force the system to turn itself off.

Summary of Contents for T200C



















































































































































































Reviews: