13
4.0 Basic Configuration
AeroPad Mini does not require drivers to be installed into your system. AeroPad
Mini is configured by using any web browser (e.g. Safari, Internet Explorer, and
Netscape) from your computer and accessing AeroPad Mini's
internal
configuration web pages (hereafter referred to as "web-config pages").
As with any wireless adapter, you will need to configure the AeroPad Mini before
it can connect to your wireless network. Mainly, AeroPad needs to know what the
Network Name (SSID)
and the
WEP Key
(if your network is encrypted) are.
A typical network diagram for a wireless network is pictured below. AeroPad Mini
is connected to a computer, giving it wireless capability. A wireless router or
access point is connected to the DSL/Cable modem, and accessing the Internet.
The AeroPad Mini is constantly communicating with the access point wirelessly,
thereby accessing the local network resources or the Internet.
Note: Wireless Router is an Access Point plus a Router. Access Point is sometimes
also referred to as Base Station.
To access and configure AeroPad Mini's web-config pages, following the steps
below.
1. Set your computer's TCP/IP values
manually
to "192.168.1.2", Subnet Mask
"255.255.255.0", and Gateway and DNS to "0.0.0.0". Refer to Section 4.1 on
how to do this for each OS.
2. Use a web browser to access and configure the AeroPad Mini using the built
in Setup Wizard that is included in the web-config pages. The Setup Wizard
will ask for your basic wireless network information so AeroPad Mini can
connect your computer to the access point. Refer to Section 4.2 for detail
instructions.
3. Chang your computer's TCP/IP settings back to "Acquire IP automatically"
will activate AeroPad Mini and bring your computer online wirelessly. Refer
to Section 4.3 for detail instructions.
4.1 Manually setting TCP/IP Values
The default IP address of the AeroPad Mini is "192.168.1.50". In order to access
the AeroPad Mini web-config pages, you will need to first set your computer to
have a fixed IP of "192.168.1.2", a Subnet of "255.255.255.0", and no Gateway