Rear Panel Description
LAN Ethernet Ports - Four 10BASE-T Ethernet network (RJ-45)
ports used for linking hub/computer in a Local Area Network to the
XRouter.
WAN Ethernet Port - One Wide Area Network port for connecting
the XRouter to the Internet via a cable or DSL modem.
Reset Button - Used for resetting the XRouter’s IP Address
information and user password to the factory default settings.
AC9V Power Adapter Receptacle - Plug the power adapter cable
into this port to supply power to the XRouter unit.
Uplink Switch - Used to determine the configuration of the
XRouter’s LAN port No. 4. Choose either parallel (normal) for connect-
ing LAN computers to the XRouter or crossover mode (uplink) for
daisy-chaining a series of hubs to the XRouter.
Hardware description
24
LAN
WAN
Reset